Pop Up Bunny Craft

Little kids will love watching your crafted bunny pop out of his dirt hole with this interactive craft!
Materials
- Neon Fuzzy Sticks
- Wiggly Eyes 10mm
- Jumbo Craft Sticks
- Construction Paper
- Scissors
- Pencil
- Craft Glue
- Paper Cup
Instructions
Step 1. Gather your supplies.
| |
![]()
| Step 2.
Cut a strip from the short side of a piece of green Construction Paper. The strip should be about 3” x 9”. Fold the green strip in half a couple of times and cut slits about halfway down. The slips should be approximately half inch apart, as shown. |
![]()
| Step 3.
Unfold the green strip. Glue the paper inside the cup, so the slits stick and look like grass. |
![]()
| Step 4.
Place you cup so that the top lines up with the long side of a piece of brown Construction Paper. Mark the bottom of the cup with a pencil. Cut the paper all the way across. |
![]()
| Step 5.
Cut the brown paper strip into smaller strips, approximately 1/2” pieces. |
![]()
| Step 6.
Glue a brown paper strip to the side of the cup. The strip should be the exact length of the cup. |
![]()
| Step 7.
Once the cup is completely covered, glue 2 strips to make an X across the cup, repeat on the other side of the cup. |
![]()
| Step 8.
To make the bunny’s body, glue 2 large white Poms to the top of a Jumbo Stick. |
![]()
| Step 9.
Make the bunny’s face by gluing 2 small white Poms to make cheeks, add a tiny purple pom for a nose and finish with the Wiggly Eyes. |
![]()
| Step 10.
Bend a White Fuzzy Stick into ears, as shown. Trim the excess. |
![]()
| Step 11.
Glue the Ears to the top of the bunny’s head. Cut a pink Fuzzy Stick and place a little piece in the inside of each ear. |
![]()
| Step 12.
Have an adult cut a sit in the bottom of the cup, large enough for the Jumbo Stick to fit. |
![]()
| Step 13.
Put your bunny in the cup, use the Jumbo Stick to pop the bunny in and out of the cup. |