Pentagon Craft Stick Bowl
Stack Craft sticks to create a unique 5-sided pentagon bowl.
- Craft Sticks 150 Pack
- Heavy Duty Scissors **May require adult assistance
- Craft Glue
- Card Stock
- Wax Paper
- Paper Towels
Step 1. Gather your supplies.
Download, and print the template onto card stock. Cut out the template.
Place a Craft Stick on one edge of your template. Using a pencil mark the Craft Stick where it sticks over the template.
Using heavy Duty scissors, have an adult cut the Craft Stick where you marked it with a pencil.
Glue the cut craft stick onto your template.
Repeat steps 3-5 so that your template is completely covered with the Craft Sticks, as shown. This will be the base of your bowl.
Glue a Craft Stick onto one edge of the base. The stick should be centered on the edge of the base.
Continue Gluing Craft Sticks around the base, centering the Sticks on each edge. The sticks will overlap each other. This will make the first layer of the bowl.
Once you have completed the first layer of the bowl, start adding a second layer. For the second layer you want to glue the Craft Sticks slightly out from the Craft Sticks on the first layer, as shown.
Continue gluing the Craft Sticks down in overlapping layers, with the Craft Sticks on each layer being glued further out than the ones on previous layers. You should start to see the shape of a bowl.
The bowl will be finished when the ends of all the craft sticks meet, after approximately 9 layers of Craft Sticks.
Place your bowl on a piece of wax paper. Using purple Simply Spray Project Paint, spray one even coat of paint on the bowl. Begin and end spraying off the project to prevent splatter. Let the paint dry approximately 30 minutes and repeat with one more coat of spray, if needed.
Your bowl is finish! Use to store all sorts of things, such as art supplies or wrapped candies.