x

Friendship Bracelet Pattern: Diamonds or Fish / Diseño de pulsera de la amistad: diamantes o peces

  • Young Adult
  • Grades 1-3

Create a diamond or a fish design with friendship bracelet thread!

Materials


  • Friendship Thread Basic Colors
  • Friendship Thread Brights & Neon
  • Friendship Thread Mega Pack
  • Scissors
  • Clipboard

Instructions


Step 1. / Paso 1. Gather your supplies.

 

Reúne tus materiales.

Friendship Bracelet

 

How to make a diamond friendship bracelet pattern

 

Step 2.  / Paso 2.

 

Before starting this pattern, make sure your brush up on how to make forward spiral knots and backwards spiral knots as both are used to make the diamond pattern.

 

Antes de empezar este diseño, asegúrate de repasar cómo hacer nudos en espiral hacia adelante y nudos en espiral hacia atrás, ya que ambos se usan para hacer el diseño de diamantes.

 

 

How to make a fish friendship bracelet pattern

 

Step 3. / Paso 3.

 

Cut friendship thread to a desired length. Our example uses 5 colors of thread: (4) at 60 inches each and (1) at 84 inches. The long thread will be the one that creates the diamond shapes (in our example, black). Fold the threads in half and tie a knot.

 

Corta el hilo de la amistad de la longitud que desees. Nuestro ejemplo utiliza 5 colores de hilo: (4) de 1,20 metros de longitud cada uno, y (1) de 2,10 metros. El hilo largo será el que cree las formas de diamantes (en nuestro ejemplo, el negro). Dobla los hilos por la mitad y haz un nudo.

 

 

friendship bracelet patterns diamond

 

Step 4. / Paso 4.

 

Secure your threads for crafting. Arrange your threads so that you have the same colors mirrored on each side, with the longest string on the outsides. On our example, we used a clipboard and arranged the threads from left to right as follows: black, orange, yellow, green, white, white, green, yellow, orange, and black.

 

Fija los hilos para que puedas trabajar con ellos. Dispón los hilos de modo que tengas los mismos colores reflejados de cada lado, con el hilo más largo en los extremos. En nuestro ejemplo, usamos un sujetapapeles y colocamos los hilos de izquierda a derecha de la manera siguiente: negro, anaranjado, amarillo, 2 verdes, blanco, blanco, verde, amarillo, anaranjado y negro.

 

 

friendship bracelet patterns fish

 

Step 5. / Paso 5.

 

Create a chevron, or arrow design using the black threads. Click here as a reminder on how to make that chevron pattern.

 

Crea un diseño chevrón o de flecha utilizando los hilos negros. Haz clic aquí para que recuerdes cómo hacer un diseño chevrón.

friendship bracelet instructions

 

Step 6. / Paso 6.

 

Starting on the left strand (orange), make (2) forward spiral knots on each of the next (3) strands going to the right, making sure to stop before the black (the diamond making color).

 

Empezando en la hebra izquierda (anaranjada), haz (2) nudos en espiral hacia adelante en cada una de las siguientes (3) hebras yendo hacia la derecha, asegurándote de parar antes de la hebra negra (el color que hará los diamantes).

 

 

 

how to make a friendship bracelet

 

Step 7. / Paso 7.

 

Starting at the left strand (yellow), make (2) forward spiral knots on each of the next (2) strands.

 

Empezando en la hebra izquierda (amarilla), haz (2) nudos en espiral hacia adelante en cada una de las siguientes (2) hebras.

 

Friendship bracelet string

 

Step 8. / Paso 8.

 

Starting at the left strand (green), make (2) forward spiral knots on the next strand.

 

Empezando en la hebra izquierda (verde), haz (2) nudos en espiral hacia adelante en la siguiente hebra.

How to make a friendship bracelet

 

Step 9. / Paso 9.

 

Now you will mirror the same steps starting at the right most strand, making backward spiral knots towards the middle. Starting with the right strand (orange), make (2) backward spiral knots on each of the next (3) strands going toward the left, making sure to stop before the black strand.

 

Ahora seguirás los mismos pasos, pero a la inversa, empezando con la hebra del extremo derecho, haciendo nudos en espiral hacia atrás. Empezando con la hebra derecha (anaranjada), haz (2) nudos en espiral hacia atrás en cada una de las siguientes (3) hebras yendo hacia la izquierda, asegurándote de parar antes de la hebra negra.

 

 

Friendship bracelet pattern instructions

 

Step 10. / Paso 10.

 

Starting at the right strand (yellow), make (2) backward spiral knots on each of the next (2) strands.

 

Empezando en la hebra derecha (amarilla), haz (2) nudos en espiral hacia atrás en cada una de las siguientes (2) hebras.

 

 

Friendship bracelet diamond pattern

 

Step 11. / Paso 11.

 

Starting at the right strand (green), make (2) backward spiral knots on the next strand.

 

Empezando en la hebra derecha (verde), haz (2) nudos en espiral hacia atrás en la siguiente hebra.

 

friend bracelets

 

Step 12. / Paso 12.

 

You will now make the pointed shape of the diamond. Begin at the center, taking the left black strand and make (2) backward spiral knots on each of the (4) strands moving to the left.

 

Ahora vas a hacer la forma puntiaguda del diamante. Empieza en el centro, toma la hebra negra de la izquierda y haz (2) nudos en espiral hacia atrás en cada una de las (4) hebras, moviéndote hacia la izquierda.

 

 

 

how to make friendship bracelets

 

Step 13. / Paso 13.

 

Create the second half of the point. Use the other black strand to make (2) forward spiral knots on each of the (4) strands moving to the right. This should look like an “x” shape, as shown.

 

Crea la segunda mitad de la punta. Usa la otra hebra negra para hacer (2) nudos en espiral hacia adelante en cada una de las (4) hebras, moviéndote hacia la derecha. Esto deberá verse como la forma de una “x”, tal y como se muestra.

 

 

 

 

diamond pattern friendship bracelet

 

Step 14. / Paso 14.

 

You will now fill in the inside of the diamond. Make (2) backward spiral knots with the (2) center orange strands.

 

Ahora vas a rellenar el interior del diamante. Haz (2) nudos en espiral hacia atrás con las (2) hebras anaranjadas del centro.

 

Friendship bracelet diamond pattern instructions

 

Step 15. / Paso 1.5

 

Use the left orange strand and make (2) backward spiral knots on each of the (3) strands going to the left, making sure to stop before the black strand. Use the right orange strand and make (2) forward spiral knots on each of the (3) strands going to the right, making sure to stop before the black strand. This should look like a reverse chevron, as shown.

 

Usa la hebra anaranjada izquierda y haz (2) nudos en espiral hacia atrás en cada una de las (3) hebras trabajando hacia la izquierda, asegurándote de parar antes de la hebra negra. Usa la hebra anaranjada derecha y haz (2) nudos en espiral hacia adelante en cada una de las (3) hebras trabajando hacia la derecha, asegurándote de parar antes de la hebra negra. Esto deberá verse como un diseño chevrón invertido, tal y como se muestra.

 

 

 

make a friendship bracelet

 

Step 16. / Paso 16.

 

Continue to fill in the inside of the diamond by making (2) backward spiral knots with the center yellow strands. Use the left yellow strand and make (2) backward spiral knots on each of the (2) strands going to the left. Use the right yellow strand to make (2) forward spiral knots on each of the (2) strands going to the right.

 

Sigue rellenando el interior del diamante, haciendo (2) nudos en espiral hacia atrás con las hebras amarillas del centro. Usa la hebra amarilla izquierda y haz (2) nudos en espiral hacia atrás en cada una de las (2) hebras yendo hacia la izquierda. Usa la hebra amarilla derecha para hacer (2) nudos en espiral hacia adelante en cada una de las (2) hebras trabajando hacia la derecha.

 

 

 

friendship bracelet pattern

 

Step 17. / Paso 17.

 

Create (2) backward spiral knots with the center green strands. Use the left green strand to make (2) backward spiral knots on the white strand to the left. Use the right green strand to make (2) forward spiral knots on the white strand to the right.

 

Haz (2) nudos en espiral hacia atrás con las hebras verdes del centro. Usa la hebra verde izquierda para hacer (2) nudos en espiral hacia atrás en la hebra blanca a la izquierda. Usa la hebra verde derecha para hacer (2) nudos en espiral hacia adelante en la hebra blanca a la derecha.

 

 

Friendship bracelet diamond pattern

 

Step 18. / Paso 18.

 

Finish filling in the inside of the diamond by making (2) background spiral knots with the center white strands.

 

Termina de rellenar el interior del diamante haciendo (2) nudos en espiral hacia atrás con las hebras blancas del centro.

thread bracelet diamond pattern

 

Step 19. / Paso 19.

 

You may now notice that the strands are arranged just as you started with the black strands on the outside. Repeat step 5 to create your chevron arrow shape, which will create the second pointed shape and close your diamond!

 

Ahora podrás notar que las hebras están dispuestas tal y como empezaste con las hebras negras en los extremos. Repite el paso 5 para crear tu forma de flecha chevrón, ¡lo que creará la segunda forma puntiaguda y cerrará tu diamante!

 

 

 

 

Friendship Bracelet Diamond Pattern

 

Step 20. / Paso 20.

 

Repeat these steps to create your continuous diamond pattern!

 

¡Repite estos pasos para crear tu diseño continuo de diamantes!

Friendship Bracelet Fish Pattern

 

FISH PATTERN:/

 

DISEÑO DE PEZ:

 

These are also the basic steps to create a fish design! To create the fish, complete steps 1-20 then create one set of chevron stripes with each color of the strands before repeating the fish design starting with the tail.

 

¡Estos también son los pasos básicos para crear un diseño de peces! Para crear los peces, completa los pasos 1 a 20 y luego crea un conjunto de franjas chevrón con cada color de hebras antes de repetir el diseño de peces, comenzando por la cola.