Candy Corn Pumpkin

Use Simply Spray® Project Paint and a simple masking technique to create a candy corn themed pumpkin this fall!
Materials
- Pumpkin (real or fake)
- Painter's or Masking Tape
- Cardboard or drop cloth to protect your surface
- Wet cloth or paper towel
Instructions
Step 1. Gather your materials.
| |
![]()
| Step 2.
Use cloth to wipe dust and dirt off the pumpkin and lay on a protected surface. |
![]()
| Step 3.
Wrap painter’s or masking tape around the pumpkin’s stem. |
![]()
| Step 4.
Measure pumpkin into three horizontal parts: the top section should be smallest and the bottom section should be largest. Use painter’s tape to cover the middle section. |
![]()
| Step 5.
Use white Simply Spray® Project Paint, to cover the top section of the pumpkin. Set aside to dry for 30 minutes. |
![]()
| Step 6.
Using yellow Simply Spray® Project Paint, to cover the bottom section of the pumpkin. Set aside to dry for 30 minutes. |
![]()
| Step 7.
Remove the painter’s tape from the mid-section of the pumpkin to reveal the white, orange, yellow candy corn pattern on your pumpkin! |
Tip:
As our pumpkin was already orange, we did not need to paint this section. You can also use fall gourds and other fall colors of project paint for unique designs! |